How to reset hummer h2 theft system ? Car wont start and the battery is full.?

Help please|||1. Turn ON the ignition, with the engine OFF.


2. Attempt to start the engine, then release the key to ON, vehicle will not start.


3. Observe the SECURITY telltale light, after approximately 10 minutes the telltale will turn OFF.


4. Turn OFF the ignition, and wait 5 seconds .


5. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes , the vehicle is now ready to relearn the Passlock(TM) Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK.


IMPORTANT: The vehicle learns the Passlock(TM) Sensor Data Code and/or password XXXXX the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.


6. Start the engine. The vehicle has now learned the Passlock(TM) Sensor Data Code and/or password.


With a scan tool clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles.